ABL METERS Installation And Configuration Manual page 24

24 |
Setup via the ABL User Interface application
Connect an RJ45 data cable to the SBC of the
2
Controller charging station / control unit and the
computer.
y For information on the location of the SBC
network jack, please refer to the corresponding
installation manual.
Open a web browser on your computer and enter
3
the following address: http://169.254.1.1:8300/.
This opens the ABL User Interface online appli-
cation, where you are automatically logged in with
the Owner role.
WARNING!
Manually setting up the network settings
If you are unable to connect to the application, check your
computer's network settings and, if necessary, adjust them as
follows:
Click the Change role selection menu in the top
4
right and select the Installer role.
Click the Products > Installation tab, navigate to
5
the bottom of the screen and click the Add prod-
ucts button.
In the product filter, click on the Product line tab
6
and select the External option.
y All available energy meters (External Meters)
are then listed.
MODBUS EN1 MODBUS
C M
N E
T T
R E
L R
Network
Subnet mask
Address
169.254.0.0
255.255.0.0
169.254.1.2