Table of Contents
Advertisement
A.22 Preventive Maintenance
In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux
Professional authorised engineers every 12 months, in accordance with Electrolux Professional Service Manuals. Please contact
your local Electrolux Professional Service Centre for further details.
A.23 Parts and accessories
Use only original accessories and/or spare parts. Failure to use original accessories and/or spare parts will invalidate the original
manufacturer warranty and may render the appliance not compliant with the safety standard.
A.24 Precautions for use and maintenance
• Risks mainly of a mechanical, thermal and electrical nature exist in the machine. Where possible the risks have been neutralised:
– directly, by means of adequate design solutions.
– indirectly by using guards, protection and safety devices.
• Any anomalous situations are signalled on the control panel display.
• During maintenance several risks remain, as these could not be eliminated, and must be neutralised by adopting specific
measures and precautions.
• Do not carry out any checking, cleaning, repair or maintenance operations on moving parts. Workers must be informed of this
prohibition by means of clearly visible signs.
• To guarantee machine efficiency and correct operation, periodical maintenance must be carried out according to the instructions
given in this manual.
• Make sure to periodically check correct operation of all the safety devices and the insulation of electrical cables, which must be
replaced if damaged.
A.25 Appliance maintenance
• The inspection and maintenance intervals depend on the actual appliance operating conditions and ambient conditions
(presence of dust, damp, etc.), therefore precise time intervals cannot be given. In any case, careful and periodical appliance
maintenance is advisable in order to minimise service interruptions.
• It is advisable to stipulate a preventive and scheduled maintenance contract with the Customer Care Service.
• Put the appliance in safe conditions before starting any maintenance operation.
A.26 Maintenance intervals
It is advisable to carry out the checks with the frequency given in the following table:
Maintenance, inspections, checks and
cleaning
Ordinary cleaning
• general cleaning of appliance and surrounding
area
Mechanical protection devices
• check their condition and for any deformation,
loosening or removed parts
Control
• check the mechanical part, for cracks or
deformation, tightening of screws: check the
readability and condition of words, stickers
and symbols and restore if necessary
Appliance structure
• tightening of main bolts (screws, fixing
systems, etc.) of appliance
Safety signs
• check the readability and condition of safety
signs
Electrical control panel
• check the electrical components installed
inside the electrical control panel. Check the
wiring between the electrical panel and
appliance parts.
Frequency
• Daily
• Yearly
• Yearly
• Yearly
• Yearly
• Yearly
Responsability
• Operator
• Service
• Service
• Service
• Service
• Service
15
Advertisement
Table of Contents
