Samsung BN68-02426A-00 User Manual page 24

4 series 400
Table of Contents

Advertisement

Available languages

Available languages

Screen Burn Protection
Configures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you
to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in minutes.
Pixel Shift
: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after-
images on the screen.
Optimum condition for pixel shift;
N
Horizontal
Vertical
Time(min.)
Side Gray
: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.
Dark
-
: When you set the screen ratio to 4:3, it darkens the left and right sides.
-
Light
: When you set the screen ratio to 4:3, it brightens the left and right sides.
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select scrolling to help remove screen burn artifacts.
Scrolling
: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern.
Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image
on the screen for a long time.
The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-
N
images on the screen. If the after-image is not removed after performing the function, repeat the function again.
Press any key on the remote control to cancel this feature.
N
PictureReset→ResetPictureMode/Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Item
TV/AV/Component/HDMI
0~4
0~4
1~4 min.
English - 24
2
2
2 min.
Advanced Settings
Picture Options
Picture Reset

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn42b400Pn42b400p3dPn50b400p3d4 series

Table of Contents