Specification - Meridian DSP8000 XE Manual

17

9. SPECIFICATION

• 1 x Meridian SpeakerLink connector [RJ45]
• 1 x co-axial digital audio [RCA phono] supporting up to 192kHz @ 24-bit
• 1 x optical digital audio [Toslink] supporting up to 96kHz @ 24-bit
INPUT CONNECTIVITY • 1 x USB digital audio [type C] supporting up to 384kHz @ 24-bit
• Bluetooth via the Meridian B-Link [supplied]
• 1 x balanced analogue audio [XLR] on analogue input module
• 1 x unbalanced analogue audio [RCA phono] on analogue input module
OUTPUT CONNECTIVITY • 1 x Meridian SpeakerLink connector [RJ45]
• Meridian comms via SpeakerLink
• Bluetooth via Meridian B-Link module and the Meridian Control app
CONTROL OPTIONS
• Integrated IR receiver
WITHOUT ANALOGUE
• External IR receiver connection
INPUT MODULE
• RS232 via SpeakerLink input
• USB via Maintenance connection
CONTROL OPTIONS
• Automatic signal-sense detect. Switch on detect time less than three
WITH ANALOGUE INPUT
seconds; switch to Standby time-out approximately 20 minutes.
MODULE • Trigger input on analogue input module [3.5mm minijack]
• Peak SPL: 120dB@1m for a single speaker
PERFORMANCE
• Frequency response in room within 3dB: 18Hz – 40kHz
FRONT-PANEL INDICATOR
• Blue in Standby, White in use [can also be unlit in use]
• Power On/Off, channel selector switch, input sensitivity switch [on
REAR-PANEL CONTROLS
analogue input module]
DSP8000 XE includes MQA Renderer technology, which can connect to an MQA
Core signal and complete the final unfold of an MQA file.
POSITIONING THE
UNPACKING
INTRODUCTION
LOUDSPEAKERS
AND ASSEMBLY
CONNECTIONS MASTER B-LINK
AND CONTROLS AND SLAVE
• Class-AB, capable of greater than 150W into 4Ω, < 1% THD
TWEETER AMPLIFIER
• THD + noise @ 1kHz < 0.005%
• Bandwidth >100kHz
• Class-AB, capable of greater than 150W into 4Ω, < 1% THD
MID-RANGE AMPLIFIER
• THD + noise @ 1kHz < 0.005%
• Bandwidth >100kHz
• Six bridged pairs of Class-D amplifiers - each pair capable of greater
BASS AMPLIFIERS
than 240W into 4Ω, < 1% THD.
• THD + noise @ 1kHz < 0.008%
TWEETER • 25mm beryllium dome with silver voice-coil, steel custom waveguide
• 1 x 160mm with non-conductive voice-coil former and anti-resonance
MID-RANGE DRIVERS
clamp-ring mounting system
• 6 x 200mm polypropylene long-throw [up to 24mm excursion] with anti-
BASS DRIVERS
resonance clamp-ring mounting system
• WIDTH: 400mm [15.2in ] tapering to 158mm [6.2in]
DIMENSIONS/WEIGHT
• DEPTH: 528mm [20.8in] tapering to 210mm [8.3in]
• WEIGHT: 110.5kg [243lbs]
• WIDTH: 490mm [19.3in]
HEAD UNIT PACKED • DEPTH: 490mm [19.3in]
• WEIGHT: 20.0kg
• WIDTH 650mm [25.6 in]
MAIN UNIT PACKED
• DEPTH: 800mm [31.5in]
• WEIGHT: 107.0kg
*With feet/spikes fitted
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Meridian Audio Limited is under license. Other trademarks and trade names are those of their respective
owners
SPECIFICATION
IR CONTROL IA21 ANALOGUE
INPUT MODULE 09
• HEIGHT*:
1350mm
[53.2in]*
• HEIGHT*:
400mm
[5.7in]
• HEIGHT*:
1350mm
[53.1in]
MAINTENANCE TROUBLESHOOTING SYSTEM
AND CLEANING APPLICATIONS