B-Link - Meridian DSP8000 XE Manual

14

6. B-LINK

OVERVIEW
The B-Link supplied with the DSP8000 XE loudspeakers supports Bluetooth® wireless
technology. When combined with the Meridian Control app, the B-Link performs the
following tasks:
• It allows access to set-up menus for the configuration of the loudspeaker during
installation. Such installation settings are stored in the loudspeaker's non-volatile
memory, so they are retained even if the B-Link is disconnected.
• It provides an intuitive interface for control of the loudspeakers from a smartphone or
tablet; to adjust the volume level, to switch the loudspeakers on and off, and to access
other settings, such as treble and bass.
In addition, the B-Link can act as a high-quality source of audio streamed wirelessly from
a Bluetooth device such as a smartphone, tablet or computer.
THE MERIDIAN CONTROL APP
The Meridian Control app is available for download for iOS devices from the Apple App
Store and for Android devices from the Google Play Store. In either case, search for
Meridian to find the app or scan the QR code shown below.
When run for the first time, the app includes a simple step-by-step installation process.
Once installed, the B-Link can be used to configure and control the DSP8000 XE
loudspeakers, or to stream audio using Bluetooth.
Scan this QR code to get the Meridian Control app
POSITIONING THE
UNPACKING
INTRODUCTION
LOUDSPEAKERS
AND ASSEMBLY
B-LINK
CONNECTIONS MASTER
AND CONTROLS AND SLAVE 06
The status of the B-Link is shown by the illuminated band which runs around the device.
Colour
Blue with steady blinking
Blue
White
White with heartbeat blinking
Blue with heartbeat blinking
Cyan
IR CONTROL IA21 ANALOGUE SPECIFICATION
INPUT MODULE
Status
Powering up
Standby
Normal mode
Pairing mode
Pairing disabled
Configuration mode
MAINTENANCE TROUBLESHOOTING
AND CLEANING APPLICATIONS
SYSTEM