Table of Contents
Advertisement
READ BEFORE ATTEMPTING OPERATION OF INSTRUMENT
The Chandler Engineering Model 3260 Constant Speed Mixer is designed for operator
safety.
To ensure safety:
• If the instrument is not used in accordance to this manual, the safety of the instrument
may be impaired.
• Locate the instrument in a low traffic area and ensure the cooling vent is not
obstructed.
• Always position the instrument in such a manner that allows easy access to the power
cord.
• Post signs where the instrument is being operated to warn non-operating personnel.
• Read and understand instructions before attempting instrument operation.
• Observe caution notes.
• Observe and follow the warning labels on the instrument.
• Always disconnect main power to the instrument before attempting any repair and
before cleaning.
• Appropriately rated fire extinguishers should be located within close proximity.
• Avoid contact with moving parts.
• Don't remove container lid while operating the mixer.
• Don't remove the container while the motor is running.
• Always wear hearing protection when operating the mixer.
Before attempting to operate the instrument, the operator should read and understand this
manual.
Where to Find Help
In the event of problems, contact your local sales representative or Chandler Engineering:
• Telephone:
• Fax:
• E-mail:
• Website:
Instrument training classes are also available.
918-250-7200
918-459-0165
chandler.sales@ametek.com
www.chandlereng.com
PREFACE
P-3
Advertisement
Table of Contents
