Philips GC3500 Series User Manual page 15

Problem
Flakes and
impurities
come out of
the soleplate
during ironing.
The
temperature
types only).
Water drips
from the
soleplate after
the iron has
cooled down
or has been
stored
only)
39_000_8219_2_DFU Booklet_A6_v1.indd 15
Possible cause
You have not
closed the cap of
properly.
Hard water forms
soleplate.
The
automatic shut-off
function has
switched off the
iron (see chapter
'Features').
You have put the
iron in horizontal
position while
there was still
water in the
water tank.
ENGLISH
Solution
Press the cap until you hear a
click.
Use the Calc-Clean function one
or more times (see chapter
section 'Calc-Clean function').
Move the iron slightly to
deactivate the automatic shut-off
function. The red auto-off
indication of the temperature
light goes out.
Always set the steam control to
position 0 and empty the water
tank after use. Store the iron on
its heel.
15
18/07/14 14:06