Philips GC3500 Series User Manual page 14

ENGLISH
14
Problem
The iron is
the soleplate
stays cold.
The iron does
not produce
any steam.
Water
droplets drip
onto the fabric
during ironing.
39_000_8219_2_DFU Booklet_A6_v1.indd 14
Possible cause
There is a
connection
problem.
The temperature
dial is set to MIN.
There is not
enough water in
the water tank.
The steam
control is set to
position 0.
The iron is not
hot enough and/
or the drip-stop
function has been
types only).
The temperature
dial has been set
to a temperature
that is too low for
steam ironing.
You have put an
additive in the
water tank.
Solution
and the wall socket.
Set the temperature dial to the
required position
Fill the water tank (see chapter
'Filling the water tank).
Set the steam control to a
position between 1 and 4 (see
section 'Steam ironing').
Set an ironing temperature that
is suitable for steam ironing
( 2
its heel and wait until the amber
temperature light goes out
before you start ironing.
Set an ironing temperature that is
suitable for steam ironing
(temperature settings 2 to
and wait until the amber
temperature light goes out.
Rinse the water tank and do not
put any additive in the water tank.
18/07/14 14:06