Philips GC3500 Series User Manual page 11

This iron is equipped with a drip-stop function: the iron automatically
water from dripping out of the soleplate. When this happens you may
hear a sound.
The automatic shut-off function automatically switches off the iron if it
has not been moved for a while.
,
indicate that the iron has been switched off by the automatic
shut-off function (Fig. 6).
To let the iron heat up again:
1 Pick up the iron or move it slightly
,
The red auto-off indication goes out.
,
If the temperature of the soleplate has dropped below the set
ironing temperature, the amber temperature light goes on.
2 If the amber temperature light goes on after you have moved the
iron, wait for it to go out before you start ironing.
Note: If the amber temperature light does not go on after you move the iron,
Cleaning and maintenance
Cleaning
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
2
cloth and a non-abrasive (liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals to clean the soleplate.
3 Clean the upper part of the iron with a damp cloth.
39_000_8219_2_DFU Booklet_A6_v1.indd 11
ENGLISH
11
18/07/14 14:06