Adjusting The Legs; Hot Surface Warning; Preparation; What To Do For Energy Saving - Beko 970475EB User Manual

4.4 Adjusting the Legs

If the product is not in balanced position, ad-
just the front adjustable legs by rotating
them to right or left.

5 Preparation

What to do for energy saving

Read the "Safety Instructions" sec-
tion first.
• This refrigerating appliance is not intended
to be used as a built in appliance.
• Do not keep the refrigerator doors open
for long periods.
• Do not place hot food or beverages into
the refrigerator.

5.1 What To Do For Energy Saving

• Do not overfill the refrigerator; blocking the
internal air flow will reduce cooling capa-
city.
• Depending on the product's features; de-
frosting frozen foods in the cooler com-
partment will ensure both energy saving
and preserve food quality.
• Food shall be stored using the drawers in
the cooler compartment in order to ensure
energy saving and protect food in better
conditions.
• Make sure the foods are not in contact
with the cooler compartment temperature
sensor shown below.

4.5 Hot Surface Warning

The side walls of your product are equipped
with cooler pipes to enhance the cooling
system. High pressure fluid may flow
through these surfaces, and cause hot sur-
faces on the side walls. This is normal and it
does not require servicing. Be careful when
you contact these areas.
• Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. Under these circum-
stances, functions and components such
as compressor, fan, heater, defrost, light-
ing, display and so on will operate accord-
ing to the needs by consuming minimum
energy.
EN / 46