Symbols And Signs - Echo CSG-670 Operator's Manual

The safety alert symbol accompanied by the
word "DANGER" calls attention to an act or
condition which WILL lead to serious personal
injury or death if not avoided.
The safety alert symbol accompanied by the
word "WARNING" calls attention to an act or
condition which CAN lead to serious personal
injury or death if not avoided.
The safety alert symbol accompanied by the
word "CAUTION" calls attention to an act or
condition which may lead to minor or moderate
personal injury if not avoided.
DECALS
Part Number 890160-07060
Always cut at wide open throttle
and with the wheel fully up to
speed. Failure to do so may cause
premature belt or wheel wear.
Part Number X503-006280
CSG – 670
D A N G E R — R e a d a n d f o l l o w
all safety precautions in operator's
manual. Failure to do so could result
in serious personal injury.

SYMBOLS AND SIGNS

DANGER
WARNING
CAUTION
Part Number 890188-07060
DANGER
CIRCLE AND SLASH
SYMBOL
This symbol means the specific
action shown is prohibited. Ignoring
these prohibitions can result in
serious or fatal injury.
NOTE
This enclosed message provides tips for use,
care and maintenance of the unit.
IMPORTANT
The enclosed message provides information
necessary for the protection of the unit.
Part Number 890178-07060
1. Read and understand your operator's manual before
using this product.
2. Use only ECHO approved cutting accessories.
3. Always wear proper safety equipment as outlined in
your operator's manual.
4. Do not twist or overload the wheel while cutting.
5. For a copy of the operator's manual, contact your
ECHO dealer or ECHO, INC., 400 Oakwood Rd.,
Lake Zurich, IL 60047-1564.
Locate this safety decal on your unit. The complete
unit illustration found in the "DESCRIPTION"
section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
3
CSG-670 TYPE1-E