Echo Power Blend CSG-670 Specification Sheet

CSG-670
Super rugged, super efficient 12" cut-off saw.
• 66.7 cc high performance, 2-stroke engine
• High speed governor maintains engine speed
between 9,500 and 10,500 rpm; wheel speed
ranges between 4,750 and 5,250 rpm
• Accommodates 20 mm inner diameter 12" wheels
• Cutting arm position is reversible
for center or flush cuts
Note: This unit uses 12" diameter cutting wheels only.
FREE BOTTLE OF
ECHO POWER BLEND XTENDED LIFE™ OIL
®
WITH EVERY CUT-OFF SAW
CUT-OFF SAW SPECIFICATIONS
Engine Engine
Model Displacement Displacement
(cc) (cu. in.)
CSG-670 66.7 4.07
CSG-680 66.7 4.07
*Note: Cutting wheels sold separately.
WHEELS*
Part Number Wheel Description
99944700012 12", 25 mm Diamond
99944700130 12", 25 mm Abrasive
99944700120 12", 25 mm Abrasive
99944700016 12", 25 mm Diamond
99944700140 12", 25 mm Abrasive
99944700150 12", 25 mm Abrasive
99944700014 14", 25 mm Diamond
99944700058 14", 25 mm Abrasive
99944700054 14", 25 mm Abrasive
99944700018 14", 25 mm Diamond
99944700064 14", 25 mm Abrasive
99944700068 14", 25 mm Abrasive
*Note: 14" wheels can be used on the CSG-680 only.
CUT-OFF SAWS
Adjustable wheel shield
Cutting wheel sold
separately
2:1 engine-to-wheel
speed ratio for greater
cutting torque
Fuel Capacity Cutting Wheel*
(fl. oz.) (dia.) (mm)
21 305 x 20 (12")
21 355 x 20 (14")
Application Part Number Wheel Description
General Purpose 99944700011 12", 20 mm Diamond
Concrete 99944700080 12", 20 mm Abrasive
Asphalt 99944700070 12", 20 mm Abrasive
Asphalt Over 99944700015 12", 20 mm Diamond
Concrete
Ductile Iron 99944700090 12", 20 mm Abrasive
Metal 99944700100 12", 20 mm Abrasive
General Purpose 99944700013 14", 20 mm Diamond
Concrete 99944700057 14", 20 mm Abrasive
Asphalt 99944700053 14", 20 mm Abrasive
Asphalt Over 99944700017 14", 20 mm Diamond
Concrete
Ductile Iron 99944700063 14", 20 mm Abrasive
Metal 99944700067 14", 20 mm Abrasive
CSG-680
Top-of-the-line cut-off saw accepts 12 or 14" wheels.
• 66.7 cc high performance, 2-stroke engine
• High speed governor maintains engine speed
between 9,500 and 10,500 rpm; wheel speed
ranges between 4,750 and 5,250 rpm
• Wheel position is reversible for center or flush cuts
• 25 mm inner diameter wheels may be
used with optional adapter 99944700200
• Compensating diaphragm carburetor maintains
consistent cutting power under load
CSG-680 with Water Kit attached.
Exclusive Pro-Fire
ignition with slope advance
timing
Wide metal shield support
stand with rubber flap helps
protect operator from flying
dust
Arbor Size Dry Weight
(mm) (lb)
20 23.8
20 25.1
Application
General Purpose
Concrete
Asphalt
Asphalt Over
Concrete
Ductile Iron
Metal
General Purpose
Concrete
Asphalt
Asphalt Over
Concrete
Ductile Iron
Metal
electronic
®
3-stage air filtration system
Grouped controls include
Vibration reduction system
throttle lock-out
CUT-OFF SAW ACCESSORIES
Part Number Description
99944700181 Water Kit
99944700191 Storage Case
99944700200 25 mm Wheel Adapter Kit —
Operate 25 mm wheels on 20 mm arbor
61102207061 25 mm Abrasive Wheel Adapter
ECHO Quality
Backed by an
Extensive Warranty
ECHO's Cut-Off Saws feature a 5 year*
consumer, 1 year commercial and 90
day rental warranty as well as a lifetime
warranty on the ignition module.
*Visit www.echo-usa.com/5year to learn more.
63