Using The Appliance - HOMCOM 800-125V70 Using Instruction

Before first use
1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance.
3. thoroughly clean the basket and pot with hot water, some washing-up liquid and a
non-abrasive sponge.
4.Wipe inside and outside of the appliance with a moist cloth.
This is an oil-free fryer that works on hot air, do not fill the pot with oil or frying fat
directly.
Preparing for use
1. Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heat-resistant surface.
2. Place the basket in the pot (Fig.3).
Do not fill the pot with oil or any other liquid.
Do not put anything on top of the appliance, the airflow will be disrupted and affects the
hot air frying result.

USING THE APPLIANCE

The oil-free can prepare a large range of ingredients.
Hot air frying
1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pot out of the Hot-air fryer (Fig.6)
3. Put the ingredients in the basket. (Fig.5)
4. Slide the pot back into the Hot-air fryer (Fig 4)
Noting to carefully align with the guides in the body of the fryer.
Never use the pot without the shelf in it.
Caution: Do not touch the pot during and sometime after use, as it gets very hot.
Only hold the pot by the handle.
5.Determine the required preparation time for the ingredient (see section 'Settings' in
this chapter).
6.Some ingredients require shaking halfway through the preparation time (see section
"Settings" in this chapter). To shake the ingredients, pull the pot out of the appliance by
the handle and shake it. Then slide the pot back into the air fryer
Tip: If you set the timer to half the preparation time, you hear the timer buzzer when
you have to shake the ingredients. However, this means that you have to set the timer
again to the remaining preparation time after shaking.
7. When you hear the timer buzzer, the set preparation time has elapsed. Pull the pot
out of the appliance
Note: You can also switch off the appliance manually. To do this, set the time to 1.
8. Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pot back into the appliance and set
the timer to a few extra minutes.
9. To remove ingredients (e.g. fries), pull the pot out of the Hot-air fryer and place it on
trial framework.
Do not turn the pot upside down still attached to it, as any excess oil that has
collected on the bottom of the pot will leak onto the ingredients.