HMS Networks AC Cloud Control Configuration page 8

In case you are not sure which AC Cloud Control you are linking, check the last 6 digits
of the MAC address, then select the correct one to proceed.
Accept the Bluetooth paring request.
Important: In case the Bluetooth is disabled a message will pop-up asking to enable it.
When having multiple AC Cloud Control on the installation, there is an easy way to
recognize them. Tap on Identify INTESIS_XXXXXX
and a message will pop-up.
1
Being XXXXXX the last 6 digits of AC Cloud Control´s MAC address.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 12.- Device selection.
Figure 13.- Bluetooth pairing request and signal error.
Device Configuration with Bluetooth
1
. The LED will start blinking white
URL https://www.intesis.com
8 / 17