Scan A Wi-Fi Network Qr Code - HMS Networks AC Cloud Control Configuration

Important: If the LED turns off, the configuration process is completed and successful.
If any error occurs during the configuration, the LED will start blinking. To understand what
the problem could be, check the

Scan a Wi-Fi network QR code

Tap on Scan Wi-Fi network QR and point your smart device's camera to the QR code.
Beware that you must scan a QR code generated with the correct access credentials,
otherwise the Wi-Fi access will not be granted.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 23.- Lighting Wi-Fi Configuration sequence WPS mode.
LED color code table
Figure 24.- Scan a Wi-Fi network QR code
Device Configuration with Bluetooth
in section 5.
URL https://www.intesis.com
13 / 17