Advanced Configuration - HMS Networks AC Cloud Control Configuration

AC Cloud Control will perform a connection sequence with the cloud server and
depending on the communication phase, the LED will blink accordingly. See
18 for more details.
Important: If the LED turns off, the configuration process is completed and successful.
If it doesn't turn off, check the

Advanced Configuration

AC Cloud Control can be configured in 3 different RF Modes:
• USA: 2412 – 2462 MHz (11 channels)
• Europe: 2412 – 2472 MHz (13 channels)
• Japan: 2412 – 2484 MHz (14 channels)
The factory settings are set to work in the most restrictive mode, USA: 2412 – 2462
MHz. Therefore, if the user doesn't change any of these parameters, AC Cloud Control
is compliant with the most restrictive RF regulations.
Tap on Advanced configuration to select the domain region where the AC Cloud
Control is located, select the Region and Save.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
LED color code table
Figure 25.- Domain region configuration
Device Configuration with Bluetooth
in section 5 for more details.
URL https://www.intesis.com
Figure
14 / 17