Wps - HMS Networks AC Cloud Control Configuration

WPS

The device can be configured using WPS by selecting WPS option and Connect.
AC Cloud Control can be set on WPS mode using the device´s toggle button as
described in the
The LED will start blinking blue for two minutes, during that time you must press the
WPS button on your access point.
Blue
Blinking
AC Cloud Control will perform a connection sequence with the cloud server and
depending on the communication phase, the LED will blink accordingly:
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Shortcuts section.
Figure 21.- WPS Wi-Fi configuration.
<2min "Click"
Figure 22.- WPS configuration LED feedback.
Device Configuration with Bluetooth
OFF
<2min
URL https://www.intesis.com
12 / 17