Advertisement
Azure Account
Azure IoT Hub Instance
Azure IoT Hub Device Provisioning Service
Azure IoT Public Model Repository
Prepare the Device.
Hardware Environmental setup
Prepare ASUS-PE200U-FaceRecognition, USB Camera.
Connect the power adapter, HDMI, USB Camera with ASUS-PE200U-FaceRecognition.
Power on the ASUS-PE200U-FaceRecognition
Connect to the network.
Software Environmental setup
The UWP app and other software for face recognition have been preinstalled on the platform, it
will start as soon as the device is turned on.
Prepare IoT Hub and DPS configuration
Please refer to
this tutorial
1. Use Azure commands or Azure portal to create a Resource Group、an Iot Hub and a Device
Provisioning Service
2. To link the DPS instance to your IoT hub
3. To create your device by individual device enrollment in your DPS instance.
4. Make a note of the DPS information (DPS endpoint/Registration ID/ID Scope/Symmetric key).
to complete the following procedures :
Advertisement
