-Service Menu;
-When the device is off, the service menu is accessed by pressing and holding the
button for 5 seconds.
-When in the service menu, it is possible to switch between parameters with the help of
the
adjusted with the help of
-Press the
button to exit by saving.
Parameter
PCB temperature
Temperature Display Unit
Thermocouple Type
Maximum Set Temperature
Maximum To Be
-Device Error Codes;
−− Phase Reading Error: Check the energy connection of the device.
−− Thermocouple Reading Error: Check the thermocouple.
−− Thermocouple Connection Error: Check the thermocouple connections.
−− Relay Board Temperature Error: Relay board temperature needs to be lowered.
buttons next to the temperature screen. Parameter value range is
button to exit without saving the change in the parameter menu, and the
Explanation
Hysteresis
Selection
to be Adjusted
Adjusted
Time
Table 1: Service Parameters
buttons next to the time display.
Min Value Max Value
−
−
27
Unit
Factory settings
−
−
−
Minute