Samsung SyncMaster 740BX Owner's Manual page 8

enters the product, turn the product off, unplug the power connector
from the wall outlet and contact a
When viewing a fixed screen for an extended period of time, residual
image or blurriness may appear.
Change the mode to energy saving mode or set a screensaver to a
changing picture when away from the monitor for an extended period of
time.
Adjust the resolution and frequency to the levels appropriate for the
model.
An inappropriate resolution may cause undesirable picture quality.
17,19 inch (43, 48 cm) - 1280 X 1024
Viewing the monitor continuously at a too close angle may result in
damage to your eyesight.
To ease eye strain, take at least a five-minute break after every hour of
using the monitor.
Do not install the product on an unstable, uneven surface or a location
prone to vibrations.
Dropping the product may cause damage to the product or the person
carrying it.
Using the product in a location prone to vibrations may shorten the
lifetime of the product or may cause the product to catch fire.
When moving the monitor, turn off and unplug the power cord. Make
sure that all cables, including the antenna cable and cables connected to
other devices, are disconnected before moving the monitor.
Failure to disconnect cables may damage it and cause fire or an electric
shock.
Place the product out of children's reach, as they could damage it by
hanging onto it.
A falling product may cause injury to the person or even fatality.
When not using the product for an extended period of time, keep the
product unplugged.
Otherwise, this may cause heat emission from the accumulated dirt or
degraded insulation, causing electric shock or fire.
Service Center.