Samsung SyncMaster 740BX Owner's Manual page 68

Less than 38 W
Dimensions (WxDxH)/ Weight (Without Stand)
407.6 x 65.4 x 335 mm / 16.0 x 2.5 x 13.2 inch
Dimensions (WxDxH)/ Weight (Simple Stand)
407.6 x 217.0 x 421.5mm / 16.0 x 8.5 x 16.6 inch (with Basic Stand) / 4.85 kg
Dimensions (WxDxH)/ Weight (Pivot Stand)
407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch (with Basic Stand) / 5.55 kg
Dimensions (WxDxH)/ Weight (Sliding Stand)
407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch (with Basic Stand) / 5.7 kg
Dimensions (WxDxH)/ Weight (Lowest HAS Stand)
407.6 X 200.0 X 368.2 mm / 16.0 X 7.9 X 14.5 inch (with Basic Stand) / 5.8 kg
VESA Mounting Interface
75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating
Storage
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor
and the computer systems will provide the best operating conditions and monitor settings. In most
cases, the monitor installation will proceed automatically, unless the user wishes to select alternate
settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm
(one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE
color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality
and you can use it without any problelms.
For example, the number of TFT LCD sub pixels contained in this product are 3,932,160.
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can
be used in all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor to low-power mode when it has not been used for a certain amount of time.
The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in
your computer. Use the software utility installed on your computer to set up this feature.
State
Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C)
Humidity: 10% ~ 80%, non-condensing
Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C)
Humidity: 5% ~ 95%, non-condensing
Normal Power saving
Operation mode
Power off
Power off
EPA/ENERGY
(Power Switch)
2000