Samsung 710TM, 910TM, 713BM, 913TM Owner's Manual page 17

Power button [ ]
Power indicator
See PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
Power port
DVI port
D-sub 15-pin port
Power on/off Switch
Kensington Lock
Use this button to turn the monitor on and off.
This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.
described in the manual for further information regarding power saving
Connect the power cord to the power port on the back of the monitor.
Connect the DVI Cable to the DVI Port on the back of your Monitor.
Connect the signal cable to the 15-pin, D-sub connector on the back
of your monitor.
Use this button for turn the monitor on and off.
The Kensington lock is a device used to physically fix the system
when using it in a public place. (The locking device has to be
purchased separately. )