Advertisement
REPLACEMENT OF MAIN PARTS
•
ON/OFF SWITCH
1. Loosen the 2 screws of the switch cover and remove it. (Fig. 17)
2. Remove the two lead wires (provided with quick-terminal)
from the switch terminals and replace the ON/OFF switch
with a new one. (Fig. 18)
3. Place the new ON/OFF switch into place and connect the
lead wires according to the schematic diagram. Then
reinstall the remaining parts in the reverse order.
•
MAIN FUSE
1. Remove the switch cover as explained previously in paragraph
"ON/OFF Switch Replacement", point 1.
2. Take out ON/OFF switch from its housing and remove the black
lead wire from the switch tab.
3. Remove the main fuse connection and replace the fuse with a
new one. (Fig.19)
4. Connect the main fuse according to the schematic diagram and
reinstall it.
Note: Observe the correct position of the main fuse before
reinstalling. (Fig.20)
5. Reassemble the switch cover and refasten the screws.
Switch cover
ON/OFF
Switch
Switch
terminal
13
Fig. 17
Fig. 18
Main
fuse
Fig. 19
Fig. 20
Advertisement
