Panasonic MC-E540 Service Manual page 12

REPLACEMENT OF MAIN PARTS
•
POWER SUPPLY CORD
1. Loosen the 5 screws from the rear cover and take it out.
(Fig. 15)
2. Remove the cord cover and power supply cord connections.
(Fig. 16)
3. Replace power supply cord with a new one. Place the power
supply cord around the cord cover and connect according to
the schematic diagram.
4. Replace the rear cover and refasten the screws.
Power supply cord
connections
12
Rear cover
Power supply
cord
Fig. 15
Cord cover
Fig. 16