Table of Contents
Advertisement
To edit events with the pattern sequencer
1.
On the pattern sequencer screen, select the
"Recorded Data" or "Empty" status instrument
part whose events you want to edit.
• You can perform event editing on one of the following
types of parts.
– A "Recorded Data" or "Empty" status part that you
are currently editing using the procedure under "To
edit an existing rhythm" (page E-107)
– A "Recorded Data" or "Empty" status part that you
are currently editing using the procedure under "To
create a new rhythm from scratch" (page E-111)
– An "Empty" status part that has undergone one of
the procedures under "To clear all rec areas
included in the currently selected rhythm" (page
E-120), "To clear a rec area of an instrument part"
(page E-118), or "To clear all instrument part rec
areas included in an accompaniment pattern" (page
E-120)
– A "Recorded Data" status part that has undergone
the procedure under "To copy preset or user rhythm
instrument part data to a rec area" (page E-119)
2.
While holding down the R-13 (FUNCTION)
button, press the C-4 (EDIT) button to display
the edit menu.
3.
Use the R-17 (t, y) buttons to move the 0 to
"EventEdit" and then press the R-16 (ENTER)
button.
• This displays the event editor screen shown below. For
information about display contents, see "Event Editor
Screen Contents" (page E-114).
Using the Pattern Sequencer
4.
Perform the following operations.
To do this:
Change the settings of already
recorded event data
Delete an individual event
Delete all events in a track
Delete all events within a
specific range of the part being
edited
Insert events
Copy events within a specific
range to a desired location
Quantize an individual note
event
Quantize all note events in the
part being edited
Quantize all note events in a
specific range of the part being
edited
Delete pitch bender events
Step input of note events
Batch adjust the velocity
(intensity) of note events
included in the part being
edited
Batch adjust the gate time
(length) of note events
included in the part being
edited
Select the types of events that
appear on the event editor
screen
*1 The "SysTrack" item on the input menu is not a pattern
sequencer event editor item.
*2 There are three view select setting items: Note,
PitchBend, and Modulation.
Perform this procedure,
starting from step 2:
"To edit an existing event"
(page E-92)
"To delete an individual event"
(page E-92)
"To delete all events in a track"
(page E-93)
"To delete all events in a
specific range of a track" (page
E-93)
"To insert an event" (page
E-94)
"To copy the events within a
specific range to a desired
location" (page E-94)
"To quantize an individual note
event" (page E-95)
"To quantize all note events in
a track" (page E-96)
"To quantize all note events
within specific range of a track"
(page E-96)
"Deleting Pitch Bender Events"
(page E-97)
"To perform step input" (page
*1
E-100)
"To adjust the velocity value of
a note event" (page E-98)
"To adjust the gate time value
of a note event" (page E-99)
"To select the types of events
that appear on the Event Editor
screen (View Select)" (page
*2
E-92)
E-115
Advertisement
Table of Contents
