Table of Contents
Advertisement
Speaker Connections Continued
Speaker have a positive and negative marking on the terminals. These are used to indicate polarity and must be
considered when wiring speakers or subwoofers to an amplifier. Amplifiers also have positive and negative
markings on their speaker outputs. Use these markings to match polarities to ensure the speakers are in phase.
Failure to wire speakers or woofers in phase with one another will result in a loss of bass. All Street Reference
amplifiers require a minimum 2 impedance in stereo or 4 in mono (bridged) mode.
2 Channel Model SRX150.2V
Advertisement
Table of Contents
