Table of Contents
Advertisement
El Capistan
- dTape Echo
STEP 2 – SET MIDI CHANNEL
4
Press either footswitch to exit and store your MIDI Channel setting
and begin using El Capistan�
NOTE: A simple way to check that communication is working is to send
CC #102 with a value of 127 when the ON footswitch is bypassed� This will
enable the ON footswitch if MIDI is properly connected and configured�
NOTE: If you are only sending data to El Capistan using the Strymon MIDI
EXP cable, the MIDI OUT mode must be set to OFF� (See
on configuring the MIDI OUT Mode�)
NOTE: MIDI Channel assignment is not saved per Favorite setting or MIDI
preset�
(CONT�)
page 30
for details
pg 29
- Quick Links:
- Knobs and Switches
Hide quick links:
Advertisement
Table of Contents
