Bypass Mode - Strymon El Capistan User Manual

El Capistan
- dTape Echo
Power Up Modes

Bypass Mode

Setting El Capistan to Buffered Bypass mode preserves the high
frequency response of your instrument's signal through your pedal
chain and long cable runs�
1 Press and hold the ON footswitch while powering up El Capistan�
Once both LEDs flash, release the footswitch�
2 Turn the MIX
or Buffered Bypass modes� The ON LED will change color to indicate
the current status as you turn the knob�
• True Bypass:
• Buffered Bypass:
3
Press either footswitch to store the Bypass mode and begin using
El Capistan�
NOTE: The Bypass mode setting persists across power cycles and is not
saved per preset�
(BYPASS MODE) knob to choose between True Bypass
GREEN (default)
RED
pg 16