Pyle PLXR3B User Manual page 8

2. USING TWO PAIRS OF INPUTS
When front and rear pairs of input are available, input the signals into the "FRONT"
and "REAR" inputs, respectively. Set the SUBWOOFER INPUT switch to "MIXED"
position to allow the signals to be fed internally to the SUBWOOFER section to
give proper outputs and set the "Y-CONNECT INPUT" switch to "OFF" position
to allow control of fader from the head unit.
SET TO THE
"MIXED" POSITION
Head Unit
3. USING THREE PAIRS OF INPUTS
All three pairs of inputs on PLXR3B can be utilized when front, rear, and
subwoofer pairs of inputs are available from a pre- amp EQ.
Set the SUBWOOFER INPUT switch to "DIRECT" position to allow independent
subwoofer level control from the EQ and set the "Y-CONNECT INPUT" switch
to "OFF" position to allow control of fader from the head unit. Note that some
head units o er independent subwoofer output signals as well.
8
www.PyleUSA.com
SET TO THE
"OFF" POSITION