Mounting Location - Pyle PLXR3B User Manual

MOUNTING LOCATION

Select the location in which you wish to mount the crossover. It is recommended
to nd a location that will allow easy adjustment. Use caution when mounting
crossover. There are many wires, gas lines, vacuum lines, brake lines as well as
a gas tank in the automobile. Make sure you know where they are when mounting
the crossover to avoid puncturing lines, shorting wires or drilling holes in the gas
tank. Once you are ready use a pencil to mark the through holes in the bottom
panel. After you have marked the locations of the holes move crossover out of
the way and drill small starter holes to make the taping screws easier to install.
Use provided screws to tighten down the crossover (see Figure # 3).
(FIGURE #3)
MOUNTING THE CROSSOVER
5
www.PyleUSA.com