3.2.3.7
SATA and RST Configuration
SATA Controller(s)
"Enable or Disable" SATA controller.
SATA Mode Selection
This can be configured as "RAID or AHCI".
Port 1~4
"Enable or Disable" SATA port 1~4.
Hot Plug
"Enable or Disable" SATA Hot-Plug.
Spin Up Device
"Enable or Disable" spin up device.
SATA Device Type
To identify the SATA that is connected to a "Solid State Drive or Hard Disk
Drive".
MIC-770 V2 User Manual
Figure 3.45 SATA and RST Configuration
66