Advantech MIC-770 V2 User Manual page 77

PEG Port Feature Configuration

– Detect Non-Compliance Device
Detect non-compliance PCI Express device in PEG. If enabled, it will take more
time at POST time.
3.2.3.5 PCH-IO Configuration
LAN1 Controller

"Enable or Disable" LAN1 controller.
LAN1 Option-ROM

"Enable or Disable" LAN1 boot option for legacy network devices.
LAN2 Controller

"Enable or Disable" LAN2 controller.
LAN2 Option-ROM

"Enable or Disable" LAN2 boot option for legacy network devices.
PCIE Wake

"Enable or Disable" PCIE to wake the system from S5. When this item is
selected as "Disabled", Wake on LAN2 function is also disabled.
PowerOn by Modem

"Enable and Disable" PowerOn by Modem
Restore AC Power Loss

Behavior when recovering from AC power loss: "S0" (power on), "S5" (power
off), or "Last State".
PCIE Device Initial Delay

Users can set seconds to delay PCIE device initial time.
Figure 3.42 PCH-IO Configuration
63 MIC-770 V2 User Manual