Warranty; Troubleshooting - Ryobi RY64400 Operator's Manual

PROBLEM
Engine rope cannot be pulled
Engine starts, runs, and accelerates
but will not idle
Emissions Parts
AIR FILTER ASSY
INCLUDES:
FILTER .................................................................................................X
ENGINE LUBRICANT ..................................X ............................................................................ X
SPARK SCREEN ..................................................................................................................................................................... X
CARBURETOR ASSY
INCLUDES:
HEAT DAM .................................................X
GASKETS ...................................................X
FUEL TANK ASSY
INCLUDES:
FUEL LINES ...............................................X
FUEL CAP ..................................................X
FUEL FILTER ..............................................X
IGNITION ASSY
INCLUDES:
SPARK PLUG ....................................................................................................................................................................... X
ALL EMISSIONS-RELATED PARTS ARE WARRANTED FOR THREE YEARS, OR FOR THE PERIOD OF TIME PRIOR TO THE PARTS'
FIRST SCHEDULED REPLACEMENT, WHICHEVER COMES FIRST.

TROUBLESHOOTING

Oil has entered the combustion
chamber.
Idle speed screw on carburetor needs
adjustment.

WARRANTY

EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST
Inspect Before
Each Use
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment to ensure
CAUSE
Clean Every Replace Every
5 Hours 25 Hours or Yearly
CALL US FIRST
call the Ryobi Help Line!
®
your complete satisfaction.
14 - English
REMEDY
This is usually caused by storing the unit
for an extended time with the engine in
an upside-down position. Remove and
clean the spark plug. Drain the oil out
of the spark plug hole, then reinstall the
spark plug.
Turn idle speed screw clockwise to in-
crease idle speed. See Figure 24.
Replace Every
50 Hours or Yearly