Related Manuals for Genie WNVR8645
Summary of Contents for Genie WNVR8645
- Page 1 64 Channel H.265 12MP NVR with 8x HDD Bays WNVR8645 Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference.
- Page 2 Intro Section Please read this instruction carefully before operating the product and keep it for further reference. All examples and pictures used here are for reference only. The contents of this manual are subject to change without notice. CAUTION: • Please check the device and the accessories after getting the device.
-
Page 3: Table Of Contents
Contents 1.0 Introduction ......................4 1.1 Product Features ...................4 1.2 Product Dimensions ..................4 1.3 Specification....................5 2.0 HDD Installation ....................6 3.0 Rear Panel Instruction ..................7 4.0 Start Up and Shut Down ..................8 5.0 Login ........................9 6.0 Configurations and Connections ................10 6.1 Network Configuration & Adding IP Camera ..........10 7.0 UPnP ........................12 8.0 NAT ........................13 9.0 Manual Recording and Playback .................14... -
Page 4: Introduction
Lan ports. The NVR can support the latest H.265 and H.264 encoding streams. The WNVR8645 NVR has a dedicated iPhone and Android App (Super Live Plus) and are supplied with free Windows / MAC CMS software. -
Page 5: Specification
Quick Start Guide 64 Channel H.265 12MP NVR with 8x HDD Bays 1.3 Specification Model WNVR8645 System Embedded Linux Network Input 64 CH IPC input Incoming Bandwidth 320Mbps Outgoing Bandwidth 320Mbps Network Input Resolution 12MP / 8MP / 6MP / 5MP / 4MP / 3MP / 1080p / 1280x1024 / 960p / 720p / 960H / D1 / CIF... -
Page 6: Hdd Installation
2.0 HDD Installation This series of the product supports 8 SATA hard drives. Please make sure that the device is powered off before the installation. The pictures of the installation are for reference only. Remove the cover and loosen the screws to take out two mounting bars. 2. -
Page 7: Rear Panel Instruction
3.0 Rear Panel Instruction The interfaces of the rear panel are for reference only. Name Description Connect to monitor Connect to high definition display HDMI device Network port Connect to USB storage device or USB mouse ALARM IN Alarm input for connecting sensor Relay output, connect to external ALARM OUT alarm... -
Page 8: Start Up And Shut Down
4.0 Start Up and Shut Down Startup Connect the monitor and the power. 2. The device will boot and the power indicator will display blue. 3. A wizard window will pop up. Shutdown Click “Start” and then select “Shutdown” icon. This will bring up a shutdown window. The device will shut down by clicking “OK”... -
Page 9: Login
5.0 Login The default username is admin and the default password is 123456. You must configure the wizard if you start the NVR for the first time and you may change the password when you configure the wizard for the first time. You can skip the settings wizard next time. Click “Start”... -
Page 10: Configurations And Connections
6.0 Configurations and Connections 6.1 Network Configuration & Adding IP Camera After you finish adding IP cameras, you can see the live images through the monitor of the NVR. The following will mainly introduce how to add the IP cameras via LAN/WAN. Set the network of the NVR. - Page 11 Quick Start Guide 64 Channel H.265 12MP NVR with 8x HDD Bays 4. Checkmark the device you want to add and then click “Add” button. The NVR will automatically refresh the cameras and return to “Edit Camera” interface. “Online” status means connecting the device successfully and you will see the live image.
-
Page 12: Upnp
7.0 UPnP You can use the UPnP function to enable the fast connection of the device to WAN via a router without port mapping. Go to Start → Settings → Network → UPnP, and enable UPnP and then click “Apply” button to save. -
Page 13: Nat
8.0 NAT NAT Settings The NVR shall be powered on and connected to the network. 2. Go to Start → Settings → Network → TCP/IP. You can obtain the IP address, subnet mask and gateway automatically. You can also manually enter them according to the actual network situation. -
Page 14: Manual Recording And Playback
9.0 Manual Recording and Playback 9.1 Manual Recording Before recording, please install and format a HDD. In the live interface you can see the menu toolbar. Click button to start recording. Click it again to stop recording. You can also click to check the status of the recording. - Page 15 Sales +44(0)1707 330541 Enquiries sales@genieproducts.co.uk Website www.genieproducts.co.uk...
Need help?
Do you have a question about the WNVR8645 and is the answer not in the manual?
Questions and answers