Table of Contents
Advertisement
■ Adjusting the Brightness of the Sound (Brilliance)
You can adjust the brightness of the sound.
1.
Turn the [Brilliance] knob to adjust the brightness of the sound.
Turning the knob toward the right will make the sound brighter, and turning it toward
the left will make the sound more mellow.
■ Adding Liveliness to the Sound (Dynamics Sound Control)
You can add liveliness to the sound to give it superb clarity and distinctness.
1.
Press the [Function] button.
The Functions screen appears.
2.
Press the cursor buttons to select <Tone Control>, then press the [
fig.d-SoundAdjust-e
3.
Press the cursor up or down button to change the dynamics setting.
Setting
Off
Sharp
Clear
Power
4.
Press the [
] button to close the "Tone Control" screen.
Explanation
The Dynamics sound control function is switched off.
Creates a sound with boosted bass and treble.
Creates a clear distinct sound in lower frequency.
Creates a sound with boosted bass.
Adding Variety to Your Performances
You can use the Memory
Backup function to store this
setting in internal memory (p.
] button.
97).
NOTE
For some sounds, this may
cause distortion.
NOTE
Dynamics does not affect the
sound from the Input jack or the
sound of external devices
connected to the MIDI Out
connector.
NOTE
If you use Dynamics Sound
Control when 3D Sound
Control (p. 89) is on, 3D Sound
Control will be turned off.
55
Advertisement
Table of Contents
