Loading A User Program Set; Deleting A Saved User Program Set - Roland HPi-6F Owner's Manual

Saving User Programs

Loading a User Program Set

Here's how a user program set you saved to USB memory or to internal memory can be loaded into the HPi-6F.
MEMO
If you're loading from USB memory, connect the USB memory to the external memory connector before you continue.
NOTE
Be aware that when you load a user program set, all of the user program in the HPi-6F will be overwritten and lost.
1. Press the [Application/Lesson] button ➝ [Function] ➝ [O] button ➝ [User Program File] ➝ [O] button ➝ [Load] ➝ [O] button (p. 22).
The "User Program File -> Load" screen will appear.
2. Use the cursor up/down buttons to select the memory in which you saved the user program set, and press the [O] button.
3. Use the cursor up/down buttons to select the user program set you want to load, and then press the [O] button.
The selected user program set will be loaded into the HPi-6F.
NOTE
Never turn off the power or disconnect the USB memory while the screen indicates "Loading... "

Deleting a Saved User program Set

Here's how to delete a user program set that was saved to USB memory or internal memory.
MEMO
If you want to delete a user program set from USB memory, connect the USB memory to the external memory connector before you continue.
1.
Press the [Application/Lesson] button ➝ [Function] ➝ [O] button ➝ [User Program File] ➝ [O] button ➝ [Delete] ➝ [O] button (p.
22).
The "User Program File -> Delete" screen will appear.
2.
Use the cursor up/down buttons to select the memory that contains the user program set you want to delete, and then press the
[O] button.
3. Use the cursor up/down buttons to select the user program set you want to delete, and then press the [O] button.
The selected user program set will be deleted.
NOTE
Never turn off the power or disconnect the USB memory while the screen indicates "Executing... "
56