Roland GAIA SH-01 Owner's Manual page 47

AMP
Parameter Range
LEVEL 0–127
A 0–127
D 0–127
S 0–127
R 0–127
LFO
Parameter Range
TRI, SIN, SAW,
SHAPE SQR, S&H,
RANDOM
TEMPO SYNC OFF, ON
Specifies the rate of the LFO.
When TEMPO SYNC is OFF:
0–127
RATE
When TEMPO SYNC is ON:
16, 12, 8 (
1/4 ( ), 3/16 ( ), 1/6 ( ), 1/8 ( ), 3/32, 1/12, 1/16, 1/24, 1/32
FADE TIME
0–127
PITCH DEPTH -63–+63
FILTER DEPTH -63–+63
AMP DEPTH -63–+63
PAN DEPTH -63–+63
MODULATION LFO
Parameter Range
TRI, SIN, SAW,
SHAPE
SQR, S&H,
RANDOM
TEMPO SYNC OFF, ON
Explanation
Specifies the volume of the tone.
Specifies the attack time of the amp envelope.
Specifies the decay time of the amp envelope.
Specifies the sustain level of the amp envelope.
Specifies the release time of the amp envelope.
Explanation
Selects the LFO waveform.
Specifies whether the LFO rate will be synchronized
with the GAIA SH-01's tempo.
), 4 ( ), 2 ( ), 1 ( ), 3/4 ( ), 2/3 ( ), 1/2 ( ), 3/8 ( ), 1/3 ( ),
Specifies the time from when the tone begins
to sound until the LFO reaches its maximum
amplitude.
Specifies the amount of modulation applied to the
tone's pitch.
Specifies the amount of modulation applied to the
tone's cutoff frequency.
Specifies the amount of modulation applied to the
tone's level.
Specifies the amount of modulation applied to the
tone's pan.
Explanation
Specifies the LFO waveform.
Specifies whether the LFO rate will be synchronized
with the GAIA SH-01's tempo.
Panel operation
Turn the [LEVEL] knob.
Move the [A] slider.
Move the [D] slider.
Move the [S] slider.
Move the [R] slider.
Panel operation
Press the [SHAPE] button to choose.
Press the [TEMPO SYNC] button.
Turn the [RATE] knob.
Move the [FADE TIME] slider.
Move the [PITCH DEPTH] slider.
Move the [FILTER DEPTH] slider.
Move the [AMP DEPTH] slider.
Hold down the [CANCEL/SHIFT] button and move the [AMP
DEPTH] slider.
Panel operation
1. Hold down the [CANCEL/SHIFT] button and move the
pitch bend/modulation lever away from yourself.
2.
Press the [SHAPE] button to choose a waveform.
3. Press the [CANCEL/SHIFT] button.
1.
Hold down the [CANCEL/SHIFT] button and move the
pitch bend/modulation lever away from yourself.
2. Press the [TEMPO SYNC] button.
3.
Press the [CANCEL/SHIFT] button.
47