Roland GAIA SH-01 Owner's Manual page 46

OSC
Parameter Range
WAVE
VARIATION
PITCH
DETUNE
SYNC/RING
PWM
PW
A
D
ENV DEPTH
FILTER
Parameter Range
MODE
SLOPE
CUTOFF
RESONANCE
CUTOFF KEY FOLLOW -100–+100
A
D
S
R
ENV DEPTH
46
Explanation
SAW, SQR, PULSE,
TRI, SIN, NOISE, Selects the waveform that is the basis of the sound.
SUPER SAW
You can select variations of the currently selected
WAVE.
-24–+24 Adjusts the pitch in semitone steps.
-50–+50 Adjusts the pitch in steps of one cent.
Selects how tone 1 and tone 2 will be com-
OFF, SYNC, RING
bined.
Specifies the amount (depth) of LFO applied to PW
0–127
(Pulse Width).
0–127 Specifies the pulse width.
0–127 Specifies the attack time of the pitch envelope.
0–127 Specifies the decay time of the pitch envelope.
Specifies the depth to which the envelope will
-63–+63
modulate the pitch.
Explanation
BYPASS, LPF, HPF,
Selects the type of filter.
BPF, PKG
-12dB, -24dB Specifies the slope of the filter.
0–127 Specifies the cutoff frequency.
0–127 Specifies the resonance.
Specifies how the cutoff frequency will be affected
by the keyboard position.
0–127 Specifies the attack time of the filter envelope.
0–127 Specifies the decay time of the filter envelope.
0–127 Specifies the sustain level of the filter envelope.
0–127 Specifies the release time of the filter envelope.
Specifies the depth to which the envelope will
-63–+63
modulate the filter.
Panel operation
Press the [WAVE] button a number of times to make your
selection.
There are three variations for each waveform, and each time
you switch the variation, the illumination of the [WAVE] button
will change as follows: unlit red
Turn the [PITCH] knob.
Turn the [DETUNE] knob.
Press the [MOD] button to choose.
Move the [PWM] slider.
Move the [PW] slider.
Move the [A] slider.
Move the [D] slider.
Move the [ENV DEPTH] slider.
Panel operation
Press the [MODE] button to choose.
Press the [SLOPE] button to choose.
Turn the [CUTOFF] knob.
Turn the [RESONANCE] knob.
Turn the [KEY FOLLOW] knob.
Move the [A] slider.
Move the [D] slider.
Move the [S] slider.
Move the [R] slider.
Move the [ENV DEPTH] slider.
green unlit ...