Preparing The System; Communicating With The Icu Controller; When The Unit Is Used As Wireless Controller - Sony JumboTron JME-SA200 Service Manual

Preparing the System

Do the following before remote control operation with this unit.
For details, read the Operating Instructions supplied with the JTC-C200
ICU controller.
4
JTC-C200 ICU controller
5 6
1
Turn on the power switch of the power distribution panel which
supplies the power to the JumboTron system.
2
Turn on the equipment which sends the images, such as VCRs and
computers.
3
Press the I side of the POWER switch on the ICU.
4
Press the I side of the POWER switch on the ICU controller to turn on
the power of the ICU controller.
5
Hold down the ICU button on the ICU controller for more than a
second to turn on the power of the ICU.
6
Hold down the SCREEN button on the ICU controller for more than a
second to turn on the power of the JumboTron screen.
20
Before Adjustment
Adjustment
3
JTC-P200 ICU

Communicating with the ICU Controller

When performing adjustment with this unit, first establish communication
with the JTC-C200 ICU controller.
The method of making communication varies depending on the remote
control system: wireless or wired.
MENU button
v/V/B/b button

When the unit is used as wireless controller

• Connect the cellular phone to the unit.
• Make sure that the phone number for the modem connected to the ICU
controller has been registered.
For connecting the cellular phone, see page 14. For registering the phone
number, see page 17.
1
Turn on the power of the cellular phone.
2
Set the POWER switch on the unit to ON.
The title display appears in the display window, and the unit
automatically starts dialing.
J U M B O T R O N
M A I N T E N A N C E E Q U I P M E N T
J M E - S A 2 0 0
When communication is established, the MAIN MENU appears in the
display window.
* * * * * * M A I N M E N U * * * * * *
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
ENTER button
POWER switch
(continued)
21
Before Adjustment
Adjustment