Mode Setting - Yuwell 582 User Manual

Chapter 2: Preparation for Use of Blood Glucose Meter

Mode setting

Enter mode setting
1. Enter when the battery is newly
installed or replaced.
2. Press the button ▽ for 3 seconds
to enter mode setting in power off
state.
07
Chapter 2: Preparation for Use of Blood Glucose Meter
Date and time setting
1. The year flashes, press the button
last two digits of the year, i.e., 20=2020), press the button
switch to the month setting.
2. The month flashes, press the button
confirm the month and switch to the date setting.
3. The date flashes, press the button
confirm the date and switch to the hour setting.
4. The hour flashes, press the button △ to set the hour (this device uses a 24-hour
system), press the button ▽ to confirm the hour and switch to the minute setting.
5. The minute flashes, press the button △ to set the minute, press the button
the minute is set and switch to the clock mode.
6. If there is no operation on the blood glucose meter in the setting state within 3
minutes, it will automatically shut down.
△ to set the year (This unit only displays the
to confirm the year and
△ to set the month, press the button
△
to set the date, press the button
08
to
to
,