Blood Glucose Test Strip And Meter Preparation - Yuwell 582 User Manual

Chapter 3: Testing Blood Glucose
9. Properly dispose of used lancet:
Unscrew the blood sampling pen adjustment cap, and cover the used lancet tip with
a protection cap to prevent the lancet tip from being exposed. Push the unloading
push rod forward and place the used lancet in a waste container.
Note: The blood sampling
pen is limited to one
person and cannot be
used by multiple people.
The lancet is only for
single use, please do not
re-use.
9
13

Blood glucose test strip and meter preparation

1. Insert the test strip into the slot of the
blood glucose meter and push the test strip
to the end. (Trademarks facing upward,
black stripes facing forward)
2. After hearing the beep (if the blood
glucose meter has buzzer), the blood
glucose meter automatically turns on and
displays the code. Check whether the code
on the test strip bottle is consistent with the
code displayed on the blood glucose meter.
(Note: when the two codes are inconsistent,
please test with another new test strip. If the
codes are still inconsistent, please contact
Yuwell customer service staff.)
Chapter 3: Testing Blood Glucose
14