Chapter 1: System Overview
Blood glucose test strips
This product uses electrochemical principle. The blood glucose test strip is inserted
into the blood glucose meter. When the blood droplets come into contact with the
blood inlet port of the blood glucose test strip, blood will automatically siphon into
the reaction zone. The Glucose oxidase catalyzes the redox reaction of glucose in
the blood, resulting in a micro current, and the glucose concentration value (mmol/L
or mg/dL) is calculated and displayed by the blood glucose meter, and then stored.
Note: please purchase
Yuwell blood test strips and
a blood sampling pen, which
Side of inserting
need to be used with the
blood glucose meter!
Reaction
into meter
zone
05
Battery installation
1. Open the battery back cover.
2. Press the spring with the battery negative pole, insert the battery, install the
battery back cover.
3. Press the battery positive pole with fingernail, and you can remove the battery.
Blood
inlet port
Note: the battery septum should be withdrawn when using this product for the first
time.
Chapter 2: Preparation for Use of Blood Glucose Meter
06