Belluscura X-PLO2R Instructions

Backpack Instructions
1 1
Disconnect the cannula and remove
the X-PLO₂R from the
small carrying bag, if applicable.
3 3
Pull on ring to open the front pocket, so
you can place the X-PLO₂R inside.
(Be sure that the LCD screen is facing up, the
cannula connector is located on the right side, and
the intake vent aligns with the mesh panel.)
5 5
Continue threading the cannula down
through the backpack, toward the X-PLO₂R.
(Pull the cannula out through the grommet so it can
connect to the X-PLO₂R.)
Turn sheet over to continue to step 2.
1-877-774-9271 | www.oxygenconcentratorstore.com
STEP 1
Placing X-PLO₂R
2 2
Place backpack on a flat
surface with the front pocket
and ring facing up.
4 4
Insert and thread the cannula
through the opening at the top
of the right shoulder strap.
6 6
Connect the cannula
to the X-PLO₂R.
TM
in Backpack.
By:
LBL 5025-02