Advertisement

Quick Links

OWNER'S
MANUAL
Model No. GZFI8013.6
Serial No.
Write the serial number in the
space above for future reference.
Serial Number
Decal (inside
tower)
Q
UESTIONS?
At FreeMotion Fitness, we are
committed to providing com-
plete customer satisfaction. If
you have questions, see HOW
TO CONTACT CUSTOMER
CARE on the back cover of this
manual.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Visit our website at
www.freemotionfitness.com

Advertisement

Table of Contents
loading

Summary of Contents for Freemotion EPIC LEG EXTENSION GZFI8013.6

  • Page 1 OWNER’S MANUAL Model No. GZFI8013.6 Serial No. Write the serial number in the space above for future reference. Serial Number Decal (inside tower) UESTIONS? At FreeMotion Fitness, we are committed to providing com- plete customer satisfaction. If you have questions, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS IMPORTANT PRECAUTIONS ..............3 WARNING DECAL PLACEMENT .
  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before using the strength equipment. 1. Read all instructions in this manual before 8. The strength equipment is designed to sup- using the strength equipment. Use the port a maximum user weight of 350 lbs.
  • Page 4: Warning Decal Placement

    WARNING DECAL PLACEMENT The decals shown below have been placed on the strength equipment in the indicated locations. If a decal is missing or illegible, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual and order a free replacement decal.
  • Page 5: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the FREEMOTION ® EPIC™ after reading this manual, see HOW TO CONTACT LEG EXTENSION strength equipment. The strength CUSTOMER CARE on the back cover of this manual. To equipment’s stylish ergonomic design and never-before- help us assist you, please note the product model seen features improve upon traditional strength training.
  • Page 6: Adjustment

    ADJUSTMENT This section explains how to adjust the strength equipment. Make sure all parts are properly tightened each time the strength equipment is used. Replace any worn parts immediately. ADJUSTING THE RESISTANCE To change the amount of resistance for your workout, Weight insert the weight pin into the desired weight.
  • Page 7: Maintenance And Troubleshooting

    Personnel must also record and report any accident. To maintain the strength equipment’s warran- ty, use only FREEMOTION EPIC parts for repair or replacement. If there are any questions or concerns, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual.
  • Page 8 Cable Guards plates. If there is not enough tension on the cables, Check the cable guards to ensure that they are not the top weight will not be lifted immediately when the rubbing against the cables and that they are holding repetition is begun.
  • Page 9 Top Weight Adjustment 3. Pull the cable out of the top weight coupler. Tools required: 5/32” hex key Determine the amount that the cable needs to be shortened, and cut that much off the end of the cable. The cable must be long enough to be 1.
  • Page 10 WEIGHT STACK SERVICING 8. Replace the top weight. Next, tighten the rod nut, rod star washer, and rod washer onto the weight Servicing the weight stack involves replacing the two rod. guide bushings and weight insert in the top weight. To order these parts, see HOW TO CONTACT CUS- 9.
  • Page 11: Cable Diagram

    CABLE DIAGRAM The cable diagram shows the proper route of the cable. Use the diagram to make sure that the cable and the cable guards have been assembled correctly. If the cable has not been correctly routed, the strength equipment will not function properly and damage may occur.
  • Page 12 NOTES...
  • Page 13: Part List

    PART LIST—Model No. GZFI8013.6 R1106A If replacement parts are needed, or if parts are missing or damaged, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. Key No. Qty. Description Key No. Qty. Description Base 1/2" x 1 1/4" Bolt Tower Weight Pin Weight Guide...
  • Page 14: Exploded Drawing

    EXPLODED DRAWING—Model No. GZFI8013.6 R1106A...
  • Page 15 EXPLODED DRAWING—Model No. GZFI8013.6 R1106A...
  • Page 16: How To Contact Customer Care

    Please be prepared to give the following information: • the MODEL NUMBER of the product (GZFI8013.6) • the NAME of the product (FREEMOTION EPIC LEG EXTENSION strength equipment) • the SERIAL NUMBER of the product (see the front cover of this manual) When ordering replacement parts, please also give the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on pages 13, 14, and 15).

Table of Contents