Disconnecting The Camera From Your Computer - Ricoh Caplio GX100 User Manual

Ricoh camera user guide caplio gx100, caplio gx100 vf kit
Hide thumbs Also See for Caplio GX100:
Table of Contents

Advertisement

Disconnecting the Camera from Your Computer

If images are downloaded using RICOH Gate La or the [Scanner
and Camera Wizard], turn the camera off after downloading images
and disconnect the USB cable.
Perform the following operations when disconnecting the camera
from your computer. (The display shown below is when connected
to Windows XP in [MASS STR]. The terms are different for other
operating systems but the operations are the same.)
1
Double-click the [Safely Remove
Hardware] icon at the right end of
the task bar.
2
Select [USB Mass Storage Device] and click [Stop].
3
Check that [USB Mass Storage Device] is selected and
click [OK].
4
Click [Close].
5
Disconnect the USB cable.
Note ----------------------------------------------------------------------------------------------
• If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed.
• Be sure to stop the connection before removing the USB cable when connected in
mass storage mode.
• Do not disconnect the USB cable during image downloading. Make sure that
downloading has completed, disable the connection, and then disconnect the cable.
6
183

Advertisement

Table of Contents
loading

This manual is also suitable for:

Caplio gx100 vf kit

Table of Contents