Using The External Flash - Ricoh Caplio GX100 User Manual

Using the External Flash

The camera has a hot shoe, allowing you
to attach an external flash (available in
stores).
When using an external flash, follow the
steps below.
1
Close the flash cover. (P.17)
2
With the camera and external
flash powered off, attach the external flash to the hot
shoe.
3
Turn on the camera, turn the mode dial to A or M, and
set the aperture value. (P.71, P.72)
4
Set the ISO sensitivity to a value other than [AUTO].
5
Turn on the external flash, turn its mode to "Auto", and
set the F-value and ISO sensitivity to the camera-set
values.
• Be sure to turn off the external flash before detaching the external
flash from the camera.
Caution------------------------------------------------------------------------------------------
Camera shake may occur when using slower shutter speeds.
X contact
7
201