Table of Contents
Advertisement
12.
When the file is located press "Open" in browser window
13.
The file name will now be written in file text line
14.
Press UPGRADE button in FWU 200 tool
15.
After a short while the FWU tool should start upgrading, the upgrade button should turn
Yellow and change to "RUNNING"
16.
The progress bar "Program" must go to the end before the upgrade is complete (less than 1
minute)
17.
When the upgrade is complete the FWU tool should be looking like this, Button turns Green
and text changes to "DONE/NEW"
18.
Now the display is upgraded
19.
To verify software version in display, in the menu go to, Info->Machine info
20.
Here you will find display software version and control software version. SW ID "Display
software", HW ID "type of device", CT ID Controller board software(if display is not
connected to a control board, control software will be 0/300)
110007944-EN
Software Manual_Pegasus.
17
Advertisement
Table of Contents
