Synthetic Endpoint
⚫
When synthetic endpoint is enabled, the Falcon GPU chassis will reserve PCIe MMIO resources from host
machines (at boot up phase) for successful device hot plug.
When synthetic endpoint is not enabled, users would have to restart the host machines every time for PCIe
scan after re-allocating devices.
Thermal Control
⚫
Users can set the fan speed and temperature threshold for Falcon GPU system. Please set a number that
suits your devices' spec. This number effects the overheat protection mechanism explained as following:
Please monitor device and chassis temperature closely when setting the parameters. Any damage caused by overheating
due to inappropriate fan speed setting is not warranted.
(Continue to next page)
33