Advertisement
Request about use
Names of Parts
Double paper holder
with shelf
YH700AD
Paper cutting plate
Double paper holder
YH700AW
Paper cutting plate
Checking the Accessories
■ Make sure that you have the following parts:
Accessory parts
Wall-mounting screw (pan head
Double paper
tapping screw φ4.5 x 30)
holder
Wall-mounting screw (pan head
Double paper
tapping screw φ4.5 x 40)
holder with shelf
Mounting Position
The gures below are reference examples of installation. Please determine a mounting position according to the situation of the installation site.
Double paper holder with shelf
25
Finished oor surface
Preparation for Installation
CAUTION
■ Use a plywood sheet that is 12 mm or more in thickness on the mounting surface.
Failure to do so could cause the installed product to be unstable and drop, and may result in injury.
■ When the mounting surface is a thin wall, mount a reinforcing wooden block that is 30 mm or more in thickness before installation.
Failure to do so could cause the installed product to be unstable and drop, and may result in injury.
■ When the mounting surface is a tile or concrete wall, use a commercially available plugs for concrete, etc.
Failure to do so could cause the installed product to be unstable and drop, and may result in injury.
・Use paper rolls which are φ120 mm or less in diameter, 114 mm or less in width, and φ38 mm in inside
diameter of tube.
・Paper rolls that do not meet the above condition may not be able to use or may be dif cult to use.
・If the product body becomes loose, use a Phillips screwdriver to retighten the screws that fasten the
product body.
Shelf board
Double paper holder
YH700AD
Product Dimensions
Double paper holder with shelf YH700AD
Core rod
20
Core rod
Double paper holder YH700AW
20
4 pieces
4 pieces
YH700AW
25
Finished oor surface
2
220
25
Wall-mounting surface
Wall-mounting surface
300
20
220
25
Wall-mounting surface
Wall-mounting surface
300
102.5
20
250
■ Flat counter
Finished oor surface
120
26
26
For versatile toilet
package
Advertisement
