Product Specifications; General Information; What's In The Box; Accessories - Trane Link UX360 Installation Manual

2. Product Specifications

Maximum Number of Stages
Storage Temperature
Operating Temperature
Power Consumption
Cooling Setpoint Temperature Range
Heating Setpoint Temperature Range
Outdoor Temperature Display Range
Indoor Humidity Display Range
Minimum Cycle Off Time Delay
* On every application, 24VAC loads should be reviewed to be sure the indoor unit control power transformer is adequately sized.

3. General Information

3.1 What's in the Box?

• Literature
- Installer Guide
- User Guide
- Warranty Card
• UX360 Smart Thermostat
• Wall Plate
• Mounting Kit
18-HD98D1-1B-EN
Specification Description
Model THUI2360A200U
Product UX360 Smart Thermostat
Size 7.125" x 4.725" x 1" (WxHxD)
Configurations Heat Pump, Heat/Cool, Dual Fuel, Heat Only, Cooling Only
5 Stages Heat, 2 Stages Cooling
-40°F to +167°F, RH non-condensing
32°F to 104°F, RH non-condensing
Input Power* 24VAC from HVAC System (Range: 18-30 VAC)
2W (typical) / 5W (max)
Wire Usage 18 AWG NEC approved control wiring
Communications Controller Area Network (CAN bus) 4-wire connection
System Modes Auto, Heating, Cooling, Off, Emergency Heat
Fan Modes Auto, On, Circulate
60°F to 99°F, 1°F resolution
55°F to 90°F, 1°F resolution
Ambient Temperature: -40°F to 141°F (including dead band),
-38°F to 132°F (excluding dead band)
External Ambient Temperature: up to 136°F
0% to 100%, 1% resolution
Compressor: 5 minutes, Indoor Heat: 1 minute

3.2 Accessories

• Wired Indoor Sensor (ZZSENSAL0400AA)
• Wireless Indoor Sensor (ZSENS930AW00MA*)
* Wireless Indoor Sensor software version 1.70 or greater
is required.
UX360 Smart Thermostat
3